A flipflop where reset is dominant. 


After a rising edge at input set S, the output Q is activated. The state remains stored until the input reset R is triggered. The input is dominant - so that if both S and R are on then the output Q is disabled.

The block can be set to be retentive, this is done by clicking on the battery symbol tl_files/loxone/documentation/EN-UK/function_blocks/Untitled.png to set the red NOT dot on the block (input is by default inactive). 


 Inputs  S Set input  
   R Reset input  0/Off
 Outputs  Q  
 Parameters  tl_files/loxone/documentation/EN-UK/function_blocks/lighting_controller/Untitled.png Remanence   0/Off