Tento funkční blok ovládá a konfiguruje Loxone Wall Display 10". Umožňuje upravit nastavení displeje, jas, hlasitost a interakce uživatele a dále spravovat oznámení a funkce úspory energie.
Obsah
Vstupy↑
| Zkratka | Krátký popis | Popis | Rozsah hodnot |
|---|---|---|---|
| Ds | Default screen | Spustí definovanou výchozí obrazovku na Wall Display 10". | 0/1 |
| P | Presence | Dokud je tento vstup aktivní, zůstává displej zapnutý a spořič obrazovky vypnutý, i když je displej nečinný a nedochází k žádné interakci uživatele. | 0/1 |
| Dnd | Do not disturb | Activates Do Not Disturb mode. All notifications are silenced. As long as there is no user interaction, the display is either fully dimmed or dimmed to the value specified by parameter "SBr", depending on the screensaver settings. Overrides input "P". | 0/1 |
| Eco | Eco | Activates Eco mode. Non-essential functions are disabled to save power. The display can be activated again by touch interaction. | 0/1 |
| DisPc | Disable device control | Disables user interaction on the device. The inputs of this function block remain active. | 0/1 |
| Bell | Bell | Plays a bell sound on the Wall Display 10". | 0/1 |
Parametry↑
| Zkratka | Krátký popis | Popis | Jednotky | Rozsah hodnot | Výchozí hodnota |
|---|---|---|---|---|---|
| DBr | Display brightness | Defines the display brightness. | % | 0...100 | 80 |
| SBr | Screensaver brightness | Defines the display brightness when the screensaver is active. | % | 0...100 | 10 |
| V | Volume | Defines the volume of the Wall Display 10". | % | 0...100 | 20 |
| Va | Volume alarm sounds | Defines the volume for alarm sounds. | % | 0...100 | 50 |
| Vbell | Volume doorbell | Defines the volume of the doorbell sound. | % | 0...100 | 20 |
| Lm | Light mode | Defines the color scheme of the app. | - | 0/1 | 0 |
| Hs | Header style | Defines the appearance of the app header. | - | 0/1 | 0 |
| ABr | Adaptive brightness | Enables automatic adjustment of the display brightness. | - | 0/1 | 0 |
Výstupy↑
| Zkratka | Krátký popis | Popis | Jednotky | Rozsah hodnot |
|---|---|---|---|---|
| DBr | Current display brightness | % | 0...100 | |
| Ui | User interaction | Remains active while the display is being used. Turns off after the user interaction timeout has elapsed. | - | 0/1 |
| API | API Connector | Inteligentní konektor založený na API. Dokáže propojit několik funkcí mezi zařízeními a bloky. API Commands | - | - |
Programming example↑
The app appearance on the Wall Display 10" can be adjusted in the properties window:
The parameters allow configuration of the display brightness, screensaver brightness, app color scheme, and header appearance:
Dvojklikem na funkční blok Wall Display 10" otevřete konfigurační okno výchozí obrazovky. Zde lze přidat až 12 již naprogramovaných bloků.
 | Only blocks for which the user of the Wall Display 10" has the required permissions can be linked. |
In this example, the display is kept active via the presence sensor while presence is detected, keeping the screensaver disabled.
The display switches back to the defined default screen when the user leaves the room and closes the door.
When the defined operating mode "Do Not Disturb" is active, notifications on the display are muted and the screensaver is activated as long as there is no user interaction.
Additionally, the bell button of the Intercom is connected to play the doorbell sound directly on the Wall Display 10" when the bell is pressed.
