Light by LOXONE – Technology
The LED Engine.
Light like the sun’s.
In every light.
The heart of every light.
One LED Engine for all Light by LOXONE lights: perfect white, every colour, and exactly the same everywhere.
CRI 95+
Natural colours from 2200 to 6500 K.
4 channels
White, red, green and blue in one engine.
100 %
Every light individually calibrated.
+50 %
More light than our previous range.
Colour rendering
Which apple looks real?
When light is missing parts of the spectrum, an apple looks brownish, wood looks dull and skin looks grey. The colour rendering index (CRI) measures exactly that: sunlight scores 100, many LEDs around 80. The LED Engine achieves 95+.
Tunable White
Follows the sun. All day long.
Fresh and cool at midday, warm and cosy in the evening: the LED Engine adjusts seamlessly from 2200 to 6500 K, with CRI 95+ across the entire range. Move the slider and watch the channels blend.
Inside
Four colours.
One orchestra.
White, red, green and blue sit together in a single engine. Like instruments in an orchestra, they combine to create perfect white and every colour.
28
LED chips packed into a tiny area in the spot – for precise light control.
340+
LEDs in the large Ceiling Light Pure.
4 in 1
White and colour from a single core.
Efficient
Chip size and colour mix optimised for efficiency.
Calibration
No more hotel room effect.
Yellowish bathroom, cold white bed, ceiling somewhere in between? The culprit is variation in LED production. That’s why we measure every light and every channel individually. The light then does its own mixing – and 2700 K means exactly 2700 K in every room.
Thermal management
Stays cool. Lasts longer.
Heat is the biggest enemy of any LED, and 40 to 45 % of the energy turns into heat. Our lights tackle this in two ways.
Schematic illustration of a thermally challenging installation, e.g. under rock wool.
Passively cooled
An aluminium-core circuit board, cooling fins and a one-piece front ring carry the heat away.
15 min ahead
The light measures continuously and looks ahead. If it’s at risk of getting too hot, it dims in good time and imperceptibly. No shutdown, no sudden jump.
Like a driver who eases off the accelerator before the bend instead of braking in it.
How well the heat can escape depends on the installation. In suspended ceilings and concrete boxes, this usually works without any problems – the light delivers full output. It can be trickier in insulation such as rock wool, for example. Only if the LED is then actually at risk of getting too hot does it adjust – so gently that nobody notices.
One engine.
One family. One light.
From spot to ceiling light, every Light by LOXONE light shares the same LED Engine. Light you never have to think about again.
Consistent
Identical light from spot to ceiling light.
Calm
Flicker-free and easy on the eyes.
24 V
Via Tree or Air, no LED driver needed.
In sync
All lights dim smoothly and simultaneously.