Audio Player Fixed Group

An Audio Player Group can be used to combine multiple Audio Player blocks. This allows for a uniform music experience in open spaces.

All Audio Player blocks that are in the same group will always play the same source. However, they remain independent in terms of volume, so that a suitable volume can be selected for different areas of a building.

For each desired group, create an Audio Player Group and assign the desired Audio Players in the block settings.

In the following example, a group was created with the Audio Player blocks in the living room and kitchen, since there is no physical separation between the two areas:

In contrast to the fixed player group in Loxone Config, dynamic groups of individual players can also be created, edited and removed by users of the Loxone App or Webinterface.

Table of Contents


Inputs

Abbreviation Summary Description Unit Value Range
V+ Volume+ Increase volume by value set in parameter (Vsts).
Double-click selects next favorite.
- 0/1
V- Volume- Decrease volume by value set in parameter (Vsts).
Double-click turns off the player.
- 0/1
V Set volume If the assigned Audio Players are set to different volumes, only the loudest players adopt the new value when the volume is changed; all other players follow accordingly but retain the volume ratio. % 0...100
Play Play - 0/1
Pause Pause - 0/1
P Presence Starts playback when 1. - 0/1
Prev Previous track - 0/1
Next Next track - 0/1
Fav Set favorite Selects a favorite based on its assigned ID number. If the selected ID does not exist, the first favorite is selected. -
Alarm Alarm Plays alarm sound at volume set in parameter (Va). - 0/1
FireAlarm Fire alarm Plays fire alarm sound at volume set in parameter (Va). - 0/1
Bell Bell Plays doorbell sound at volume set in parameter (Vbell). - 0/1
Off Off Pulse: Outputs are reset / switched off.
On: Block is locked.
Dominating input.
- 0/1
DisPc Disable periphery control Disables inputs V+, V-, V, Play, Pause, P, Prev, Next, Fav, Bell, Buzzer, T5, TTS, BTp when On. (e.g Child lock, cleaning)
Control via user interface is still possible.
- 0/1
DisP Disable presence As long as this input is active, any change in value at input (P) is ignored. - 0/1
T5 T5 control Button 2 : Volume up; double-click starts playback or choses next favorite
Button 5 : Volume down; double-click pauses playback
Button 3: Double-click activates (2C); triple-click activates (3C); (Roff) = 0: pauses playback
-
TTS Text to speech Converts a Text to speech and plays it at the volume set in parameter (Vtts). - -
LineIn Set Line In Selects the Line In of an Audioserver as source based on its Line In ID. - 0...∞
Cs Custom sound Plays custom sound [filename] at volume [vol]. E.g. soundcheck.mp3:80 [filename]:[vol]
Custom sounds have to be stored on the Audioserver’s SD card in the folder Event_Sounds!
Only mp3 files are supported.
- -




Outputs

Abbreviation Summary Description
AC API Connector Intelligent API based connector.
API Commands




Parameters

Abbreviation Summary Description Unit Value Range Default Value
Tdc Time double-click s 0...10 0.35
Roff Ignore room off command Ignore Room Off / House Off via T5 (button 3) - 0/1 0
BTp Bluetooth pairing As long as this input is active, bluetooth pairing is available.
During this time all bluetooth-enabled Loxone devices can be paired with e.g. a smartphone or other bluetooth-enabled devices.
Input is only visible when services and bluetooth are handled by player group
This parameter is only visible in certain configurations.
- 0/1 0




Properties

Summary Description Default Value
Selection All selected function blocks can be controller together. -
Enable AirPlay Enable AirPlay for all players of this group -
Enable Spotify Connect Enable Spotify Connect for all players of this group -
Handle services by group If services are handled by player group, the configured players are not visible in Airplay and Spotifiy connect. -
Room Favorite Priority When activated, the first room favorite will always be used when activating the player. -