Counting Up/Down with trigger and direction input
Table of Contents
Inputs↑
| Abbreviation | Summary | Description | Value Range |
|---|---|---|---|
| C | Count | With each pulse, the counter is increased/decreased by 1 | 0/1 |
| Dir | Direction | 0 = up, 1 = down | 0/1 |
| R | Reset | When 1 (O) = 0 and (V) = (Sv) | 0/1 |
Outputs↑
| Abbreviation | Summary | Description | Value Range |
|---|---|---|---|
| O | Output | Switches dependent on the parameter (Von) & (Voff) | 0/1 |
| V | Counter value | ∞ |
Parameters↑
| Abbreviation | Summary | Description | Value Range | Default Value |
|---|---|---|---|---|
| Rem | Remanence input | Remanence input: If active, the function block retains its previous state after a Miniserver reboot. The state of the function block is saved: – When saving to the Miniserver – At a planned reboot – Before a backup – Once per hour The data is saved on the SD card. | 0/1 | 0 |
| Sv | Start value | Input parameter - start value of the ramp control | ∞ | 0 |
| Von | On-value | ∞ | 10 | |
| Voff | Off-value | ∞ | 5 |
Timing Diagram↑
