EIB Dimmer

Using the +/- input trigger sets an appropriate value at the output for EIB dimmer

Table of Contents


Inputs↑

Abbreviation Summary Description Value Range
+ Dim+ 0/1
- Dim- 0/1
DisPc Disable periphery control Disables all inputs. 0/1
On On 0/1
Off Off 0/1
Set Sets output (D) to value of input (Set) ∞
S Status Connect this input to a EIB-sensor (group address switching or response of switching) 0/1
Cdv Current dim value Connect this input to a EIB-sensor (group address brightness or response of brightness) ∞




Outputs↑

Abbreviation Summary Description Value Range
D Dimmer output Connect this output to a EIB-dimmer actuator (group address dimming) ∞
S Status Switching output for turning On and Off dimmer
This output is controlled by the inputs (On) and (Off).
Connect this output to a EIB-dimming actuator (group address switching)
0/1
Cdv Current dim value Connect this output to a EIB-dimming actuator (group address brightness). ∞
AC API Connector Intelligent API based connector.
API Commands
-




Parameters↑

Abbreviation Summary Value Range Default Value
Sts Step size ∞ 5
Rr Repetition rate ∞ 0,2




EIB/KNX interface↑

The Loxone Miniserver Gen. 1 has a full-fledged EIB interface for a wide range of applications.

EIB sensors: Use of EIB sensors instead of classic buttons in a Loxone installation

User interface: Supplementing existing EIB installations for user interface

Logic: Supplementing existing EIB installations for logic