The LOXONE Down Light Pure RGBW Air is a recessed LED downlight that combines high-quality tunable white light (2 200 – 6 500 K) with vibrant colored light. It is powered by 24 V DC and controlled directly via the LOXONE Air interface.
Datasheet Down Light 4 Pure RGBW Air
Datasheet Down Light 6 Pure RGBW Air
Table of Contents
Mounting↑
Connect the 24 V power supply (orange/orange-white wires).
Fold back the retaining clips and insert the spotlight into the mounting opening until it snaps into place. Make sure that no cables are pinched.
 | We recommend using a separate LED power supply for a group of Down Lights to avoid interference from other devices. All LOXONE power supplies are suitable for this purpose. |
 | If the luminaire comes into contact with metal structures in the building, proper equipotential bonding must be established to protect its electronics from interference or damage. |
| The luminaire may reach high surface temperatures during operation. Install it out of reach (typically >= 2.5 m above the finished floor level). |
Commissioning↑
For commissioning, the device must be supplied with power and a connection to the Miniserver must be possible via the Air Interface.
Then follow the pairing procedure on the Air Interface.
To manually activate pairing mode, disconnect the device from the power supply for 10 seconds and then power it on again. If no connection to the Miniserver can be established within two minutes, pairing mode is activated for 30 minutes.
Actuators↑
| Summary | Description | Value Range |
|---|---|---|
| Smart actuator RGBW | Smart actuator | ∞ |
Diagnostic Inputs↑
| Summary | Description | Unit | Value Range |
|---|---|---|---|
| Online Status Down Light Pure RGBW Air | Indicates whether the device can be reached by the Miniserver. Diagnostics for Air devices Diagnostics for Tree devices Diagnostics for Extensions | Digital | 0/1 |
| System temperature | Provides the internal device temperature. This is often the temperature of the CPU or another location in the device. | ° | ∞ |
| Temperature Shutdown | Input is active, when the outputs of the device have been switched off due to high device temperature. Possible reasons: Ambient temperature too high, outputs overloaded. | Digital | 0/1 |
Properties↑
| Summary | Description | Default Value |
|---|---|---|
| Monitor Online Status | If checked, you will be notified via System Status or the Mailer if the device is no longer available or goes offline. | - |
| Disable Repeater functionality | Disable repeater functionality of this Air device. LOXONE Air is based on mesh technology. Any air device connected to the power supply can repeat packets from other Air devices, thus extending the range and stability of the overall system. In large systems with a large number of air devices in a confined space, the communication between the air devices can lead to a very high radio channel utilization. A reliable accessibility of the air devices can not be guaranteed. Disabling repeater functionality on individual Air devices can help. Do not disable this function recklessly as this may affect the range and stability of the system. | - |
| Serial Number | Serial number of Air device. Automatic pairing can be enabled on the Air Base. Automatic pairing can be enabled on the Airbase for a set time. | - |
| Lighting Group | Assigned Lighting Group. To create a new group simply start typing a name. | - |
Safety Instructions↑
Installation must be carried out by a qualified electrician in accordance with the applicable regulations.
Documents↑
Datasheet Down Light 4 Pure RGBW Air
Datasheet Down Light 6 Pure RGBW Air