Simple counter with limit
Tip: If (M) = 1 the counter will only start over if a reset (Off) is triggered or (M) is set to 0.
Table of Contents
Inputs↑
| Abbreviation | Summary | Description | Value Range |
|---|---|---|---|
| C | Count | Pulse increases (V) by 1. | 0/1 |
| Off | Off | Pulse: Outputs are reset / switched off. On: Block is locked. Dominating input. |
0/1 |
Outputs↑
| Abbreviation | Summary | Value Range |
|---|---|---|
| Lr | 1 when (V) = (L) | 0/1 |
| V | Counter value | ∞ |
Parameters↑
| Abbreviation | Summary | Description | Value Range | Default Value |
|---|---|---|---|---|
| Rem | Remanence input | Remanence input: If active, the function block retains its previous state after a Miniserver reboot. The state of the function block is saved: – When saving to the Miniserver – At a planned reboot – Before a backup – Once per hour The data is saved on the SD card. |
0/1 | 0 |
| L | Limit | ∞ | 1000 | |
| M | 0 = counter loops automatically, 1 = counter stops at limit | 0/1 | 0 |