Loxone Support Community
Find answers, ask questions and become part of the Loxone Community.
5 years ago
Is there any available modbus templates premade for the Eastron SDM120, and Eastron SDM230 energy meters? Or is it easier making the template myself?
5 years ago
Hi Dean
There are no Loxone Modbus templates for these particular devices. However within config there is a template for an Eastron SDM630.
On comparison to the manual for the SDM120 the registers appear the same and therefore you should be able to use this template.
KR
Hugh
5 years ago
Is there modbus template for the loxone’s 3 phase meter that shows VOLTAGE for each phase?
5 years ago
Hi
All registers available can be seen on the datasheet for the energy meter https://www.loxone.com/enen/wp-content/uploads/sites/3/2016/10/EN_KB_Diagram_Loxone_Modbus_Electricity_Meter_Threephase_Datasheet.pdf
In config it will look as follows for Phase 1 for instance.
KR
Hugh
Thanks Hugh, i’ll have a look into it.