Intercom Changelog
LOXONE Intercom Firmware 16.0.9.16
New
- [Security] A3D9-T1837 Intercom now uses secure HTTPS connections for Miniserver Webservices automatically, based on Miniserver type.
LOXONE Intercom Firmware 15.1.4.15
New
- NG1-T167 Added support for commissioning mode for Tree devices on Intercom Tree
Fixed
-
A3D9-T1479 Intercom – Network Configuration Compromise
-
BG-I34894 Intercom crash after attempting to open a fourth parallel video stream
-
BG-I35556 Kick notification was sent to wrong session
-
BG-I30953 Reduce exposure of informations in webinterface when not logged in
-
BG-I28967 Sometimes wrong picture was shown in activites
LOXONE Intercom Firmware 15.0.7.9
New:
Fixed:
LOXONE Intercom Firmware 14.0.2.21
New:
Fixed:
LOXONE Intercom Firmware 13.2.1.12
New:
– Proximity Sensor:
– Webservice /dev/tof/set/rangelimit/x to limit the range (x is a value in cm). Range limitation can be checked with /dev/tof/get/rangelimit
– Use automatic distance mode switching
– Extended ranging result validation
– Reduced measurement period
Fixed:
– BG-I20311 Intercom video stream doesn’t abide by user permissions
– IN1-I666 Reduced httpserver watchdog timeout
– Improved error handling of connection establishment
– IN1-I571 Stopping video source failed
– fixed possible race condition in session error handler
– BG-I15724 TTS not played after bell event
– fixed restart due to watchdog
– missing NOICE notification in some cases when firewall blocks udp communication
– BG-I14723 no dns cache used for stun server
– BG-I18826 Media zone did not recover
LOXONE Intercom Firmware 13.1.10.6
New:
– Extended call API for App
Fixed:
– BG-I18045 Restart loop due to defect CAN controller
– BG-I18633 No ICE match due to ignored remote host candidates
– BG-I18436 Router restart was not detected in some cases
– fixed crash due to possible race condition in dns handling
– BG-I13180 Intercom on a Client is not updateable via Loxone Config
LOXONE Intercom Firmware 13.1.9.14
Fixed:
- increased dhcp timeout
- fixed crash due to overwritten memory
- IN1-I498 Pairing was not possible
- BG-I17460 Wrong led status after unlearning during activated led
- fixed possible crash when dns query times out
- fixed crash in mDNS service
- fixed no response from Httpserver
- fixed exceptions in Httpserver
- IN1-I575 New https certificate was not applied properly
- fixed memory leaks
- Techreport did not work in some cases
- BG-I18169 Remove requested tokens after use
- BG-I17941 Local video stops after a few seconds when Intercom is blocked on router firewall
- BG-I18041 Local video not possible in some cases when DNS server is not reachable
LOXONE Intercom Firmware 13.0.6.29
New
-
Optimizations for getting last snapshot from multiple devices
-
IN1-T134 Use thumbnails for activities preview and rich push notification
-
A3D9-T702 Add support for Intercom via Trust
-
play bell sound on external trigger of bell event
-
TRK translations
Fixed
-
IN1-I391 Intercom is not responding to mDNS requests
-
IN1-I441 Update did not start
-
BG-I16144 Old image is shown on ManualBell Event in some cases
-
IN1-I457 Pairing window did not work in some cases
-
Touch: increased touch threshold
-
IN1-I353 Use Intra-Refreshing of video frames for streams with higher resolution/fps to avoid flickering when there are two streams open
-
BG-I17069 Restart loop due to watchdog not triggered
-
IN1-I492 Intercom admininterface – Login possible without Admin permission
-
BG-I17128 No Bell Sound played during maxB active
-
BG-I17170 Trust Intercom: weird bell sound
-
Trust Intercom: Snapshots are not available for all members when same bell trigger is used
-
IN1-I535 Sporadically no video stream possible in some cases
-
BG-I17223 Intercom did not respond to mDNS requests
LOXONE Intercom Firmware 12.4.3.30
New
-
Touch: added debouncing and activated increased filter
-
BG-T2587 adapted temperature limits
-
IN1-T153 Add support for maximum number of saved photos configuration parameter (Loxone Config min version 12.4.3.28 needed)
Fixed
-
fixed case-sensitive parsing of http headers
-
BG-I14953 TTS not working when MS is in SK language
-
IN1-I368 dhcpcd initialized too early in some cases
-
fixed restarting of dhcpcd
-
SK translation missing in admin interface
-
HttpServer not responding reliable anymore after crash as listening sockets didn’t close properly in some cases
LOXONE Intercom Firmware 12.4.1.13
New
- increase minor version due to year change
Fixed
-
IN1-I330 Webserver improvements
-
IN1-I136 Improved loading of activities
-
IN1-I339 Improve file stream handling
-
IN1-I163 Videostream stops after bell event
-
BG-I14166 Restart due to watchdog timeout
-
fixed exception in WsMessageHandler
-
IN1-I336 fix issue with login via ms proxy, fixed webserver cleaning up after postdata
-
BG-I14518 Fixed handling of fragmented http requests
-
IN1-I351 Fixed endless loop in restarting video stream
What is a known issue?
We work continuously to correct any known bugs in our products and software. This page details a list of bugs and errors found that affect the performance and usability of the software.
In order for an error to count as a known issue, it must be a reproducible error that affects the operation of the Audioserver.
Please note: We do not list every minor bug/error within Known Issues!
Product failures which are not known issues include:
- Failures of services such as Loxone Cloud Services where these are of short duration (<1 day)
- Minor errors which have no effect on the functionality of the software. These include, for example, minor display errors.
If you have discovered an error which you feel ought to be included in the Known Issues list, please contact our support team.