LOOKING FOR OUR VIDEOS?
We have a wide range of videos on our Video Channel, which cover topics such as wiring up your Miniserver, how to get started with Loxone config, and introductions to some of our products.
SAMPLE FILES
See our sample configurations below and discover how simple it is to set up your Loxone system.
Caution: Please use always the latest version of our configuration software with the sample files.
Smart Home Programming
For full details of how to carry out a project including planning, scoping customer requirements and installation, book your place on our ‘Project Days’ training course now.
Demo Case Default Configuration
This is the default configuration file that is included with the Demo Case.
Gate control
This configuration file shows how you can use Loxone to control your gate and access systems.
iButton Access
This file was created for a blog post on access, and shows how simple and versatile iButtons can be for access with Loxone.
Zoned alarm
This file shows how to use multiple burglar alarm blocks to create alarm zones throughout your house.
Using lighting for an alarm
This configuration file shows you how to use the Central block with lighting controllers and the burglar alarm block to flash your lights when the alarm is triggered.
Home cinema
Loxone can be used to set up macros so that you can bring on multiple AV devices and set them to the right sources, volume levels etc. This example shows how to set up a basic macro system for a home cinema using a AVR, BluRay player, projector and Sky box.
Integrating Sonos with Loxone
This example shows how Sonos can be integrated with Loxone. Using 4 essential buttons (Play/Pause, Volume Up, Volume Down, Next Station) it’s very simple to control your Sonos system without the need for an external controller.
Loxone Music Server
See how to configure your Miniserver to work with our Loxone Music Server. This file uses our recommended pushbutton setup.
Automatic blind control
Example configuration for automatic blinds which adjust themselves according to the sun’s position. The video shows in more detail how to use Loxone and the blind function blocks.
Grouped blind control
Using the Blind function blocks with Loxone Config you can control all the blinds in your house from buttons or the user interface. This configuration file shows how to control blinds in groups using the Central block.
Simple blind control
Using the Blind function blocks with Loxone Config you can control all the blinds in your house from buttons or the user interface. This configuration file also shows how to open/close all the blinds centrally.
EIB KNX – Miniserver for logic
In this file we show how to use the Miniserver to make all your logic decisions with a basic configuration of group addresses for the KNX sensors and actuators.
EIB KNX – Miniserver for user interface
If you want to use the Loxone Miniserver just to give your KNX installation a simple and easy to use user interface then we recommend using our EIB specific blocks. This file shows you the 3 blocks with their suggested configuration.
Smart water harvesting
One of the main reasons to use Loxone is to save energy and conserve resources. This configuration file shows you how to do just that for rain water harvesting.
Heating control
In this sample file, you’ll see how to control your heating with Loxone and how to set up an intelligent room controller. See the video for more information on the intelligent room controller function block.
Heating control of a thermal store
In this sample file, you’ll see how to control a more complex heating system that includes a thermal store.
Shading and heating
Check out this file to see how to use your blinds to control the temperatures in your rooms.
Lighting control with scenes
Example configuration for lighting control using scenes with the Lighting Controller function block. The video shows you how to configure lighting in more detail!
Lighting control with switches
Example configuration for lighting control with a simple switch, motion sensor lighting in a study, and staircase or landing light control. The video shows how to configure this in more detail!
Outdoor lighting
Find out how to control your outside lights in different ways, from manual to fully automatic, in this configuration file.
Using the timer switch
This config file shows you how to use the timer in both analogue and digital mode, with two examples.
Wake on LAN
This example shows you how simple it is to turn on your laptop or computer with Loxone.
Communication between Miniservers
Using our software from version 5 onwards multiple Miniservers can send information between each other so that only one user interface is needed to control all the Miniservers. This file shows how to do this for an alarm and heating in a main house and annex.
Smart Home UK
You can download the file for the three bed room typical UK home that we use in our Smart Home UK study on our website under the Purchase section.
FIND OUT MORE
Interested in finding out more about what Loxone can offer you? Contact Us
Learn more about the applications of Loxone: Case Studies
Find out about the possibilities of Loxone Config: Documentation