Tablet

To manage Android and iPad-OS tablets with a Miniserver, these can be integrated similarly to Air or Tree devices.

Managed tablets can be further integrated with this function block.

Table of Contents


Inputs

Abbreviation Summary Description Value Range
Ds Default screen Input can be used to launch the specified Default Screen on the Tablet by triggering this input. 0/1
P Presence As long as the output is active the display will stay on and the Screensaver stays off, even if the tablet is idle and there is no user interaction. 0/1
Dnd Do not disturb All notifications will be silenced. Fully dims display as long as there is no user interaction. Overrides input (P). 0/1




Outputs

Abbreviation Summary Description Unit Value Range
DBr Current display brightness % 0...100
Cac Charging active On when charging - 0/1
Blvl Battery level Current battery level % 0...100
Ui User interaction Stays ON as long as the tablet is in use. Goes Off after the user interaction overrun duration has ended. - 0/1
AC API Connector Intelligent API based connector.
API Commands
- -




Parameters

Abbreviation Summary Description Unit Value Range Default Value
DBr Display brightness Specifies the brightness of the display. % 0...100 80
SBr Screensaver brightness Specifies the brightness of the display when the Screensaver is on. % 0...100 10




Programming example

The App's display on the tablet can be adjusted in the properties window:

In this example, the tablet switches back to the defined standard screen when the user leaves the room and closes the door.
If the defined operating mode "Do not disturb" is active, notifications on the tablet are muted and the screensaver is activated as long as it is not being operated.

The current Miniservers can each manage up to 64 tablets, Gen. 1 variants up to 31.