Up Counter

Simple counter with limit
Tip: If (M) = 1 the counter will only start over if a reset (Off) is triggered or (M) is set to 0.

Table of Contents


Abbreviation Summary Description Value Range
C Count Pulse increases (V) by 1. 0/1
Off Off Pulse: Outputs are reset / switched off.
On: Block is locked.
Dominating input.


Abbreviation Summary Value Range
Lr 1 when (Lr) = (L) 0/1
V Counter value


Abbreviation Summary Description Value Range Default Value
Rem Remanence input Remanence input: If active, the function block retains its previous state after a Miniserver reboot.
The state of the function block is saved:
– When saving to the Miniserver
– At a planned reboot
– Before a backup
– Once per hour
The data is saved on the SD card.
0/1 0
L Limit 1000
M 0 = counter loops automatically, 1 = counter stops at limit 0/1 0