AAL Smart Alarm

This function block enables intelligent detection of emergency situations. If an individual is in need of help (e.g. after falling), help can be contacted quickly. In addition, a manual alarm is available, e.g. via an emergency button or other alarm logic. Loxone products such as the Motion Sensor Tree can easily be selected via a configuration dialog (double-click on the block).

Intelligent detection of emergency situations:
A timer is started at the falling edge of the motion detection. If no further motion is detected within this time in this or another room, the alarm will be triggered. The timer duration depends on the room type and can be adjusted.
The 'Home idle' input (L) deactivates intelligent detection. It will automatically restart as soon as movement is detected again.

IMPORTANT: To ensure reliable detection, motion sensors must be assigned to each room and the 'Home idle' input (L) must be used.

Table of Contents


Inputs

AbbreviationSummaryDescriptionUnit
AManual alarmConnect an emergency button or other alarm logic here.Digital
MvtMotion thoroughfareInput for user-defined motion logic. Loxone products can be selected via the configuration dialog (double click on the block).Digital
MvrMotion common roomInput for user-defined motion logic. Loxone products can be selected via the configuration dialog (double click on the block).Digital
MvbMotion bedroomInput for user-defined motion logic. Loxone products can be selected via the configuration dialog (double click on the block).Digital
CAcknowledge alarmOutputs Q1 and Q2 are reset.Digital
RResetAcknowledges the alarm and resets all outputs. As long as this input is active, the block remains disabled and ignores any further inputs.Digital
LLeave homeThe intelligent detection of emergency situations is deactivated as long as this input is active. A manual alarm (input A) is still possible.Digital




Outputs

AbbreviationSummaryDescriptionUnit
Q1-2Alarm level 1-2Level 1 is activated immediately upon alarm triggering, level 2 after the delay set with parameter D.Digital
TQaCause of alarmLast alarm triggering event.Text
TaTime of alarmDate and time of last alarm triggering event.Text




Parameters

AbbreviationSummaryDescriptionUnitValue RangeDefault Value
TtTime thoroughfareIf no further motion is detected in a thoroughfare within this time after the end of previous motion, an alarm is triggered.min1...∞15
TrTime common roomIf no further motion is detected in a common room within this time after the end of previous motion, an alarm is triggered.min1...∞60
TbTime bedroomIf no further motion is detected in a bedroom within this time after the end of previous motion, an alarm is triggered.min1...∞420
DDelay alarm level 2s0...∞60




Preferences

SummaryDescriptionValue RangeDefault Value
Number of entriesMaximum number of saved messages or notifications.2...10020
ConfigurationHere you configure devices for automatic use as detectors in the block (e.g. motion detector tree). Motion detectors without room assignment or assigned to a room of the types Other or Central are ignored in the intelligent detection of emergency situations and grayed out in the dialog.--