Music server zone
These function blocks will control the audio for your Loxone Music Server.
The Music server zone block is designed to be used with our Loxone Music Server. You use a block per room or zone of your house.
The blocks can be controlled by physical switches, but are also shown on the user interface so you can control what music is playing in the room, see cover art, control volume and more.
In order to use the block "Music Server Zone ", a Music Server must first be commissioned.
If a zone is renamed, this change for Air Play and other services will not be visible until the music server is rebooted.
All Events begin on the rising edge and will continue until a falling edge is detected.
This applies to:
- Fire alarm
- alarm clock
\\"I[Music server's IP]"\Event_Sounds
If you choose to have a separate event sounds, copy the desired audio file to this folder and rename it. For example, for the doorbell - "1 - doorbell.mp3".
Before you can use the Music server zone blocks you must first have a Music Server set up and added to your config. You can find out how to do this on the Loxone Music Server Setup page.
|Tr||Trigger input||Toggle the room on and off, a double and triple click on the input will also turn the room off.|
|On||On input||Always turns the room on, a double and triple click on the input will also turn the room off.|
|Off||Off input||Always turns the room off, a double and triple click on the input will also turn the room off.|
|V+||Increment volume input||Increases the volume by a set amount (defined by parameter Sv). Long press will continue increasing volume. A double click will change to the next source.|
|V-||Decrement volume input||Decreases the volume by a set amount (defined by parameter Sv). Long press will continue decreasing volume. A double click on the input will turn the source off.|
|Alv||Set the volume (analogue input)||You can set the volume using this input, between 0 and 100% volume. A double and triple click on the input will also turn the room off.|
|S+||Increment the source||Scroll through the sources with this input. A double and triple click on the input will also turn the room off.|
|AIs||Set the source (analogue input)||You can set the source using this input, the number will depend on the Music Server you have it will either be 1-8 or 1-12. A double and triple click on the input will also turn the room off.|
|Play||Play track input||After a pause, the play button will restart a track from the same position, after a stop command the play button will restart the playlist. A double and triple click on the input will also turn the room off.|
|Pause||Pause track input||Will pause the track, the room will still be on and the playlist open. A double and triple click on the input will also turn the room off.|
|Stop||Stop track input||Will stop the track, the room will be on but the playlist will be exited. A double and triple click on the input will also turn the room off.|
|Next||Next track input||Switch to the next track in the source playlist. A double and triple click on the input will also turn the room off.|
|Prev||Previous track input||Switch to the previous track in the source playlist. A double and triple click on the input will also turn the room off.|
|Shuffle||Shuffle input||Toggles the shuffle option on and off. Button is invisible on the user interface when using AirPlay as this feature is not available with AirPlay. A double and triple click on the input will also turn the room off.|
|Repeat||Set repeat option (analogue input)||A value of 0 will play the playlist once and then exit.
A value of 1 will play the playlist continuously.
A value of 2 will play the playlist twice and then exit.
A double and triple click on the input will also turn the room off.
Button is invisible on the user interface when using AirPlay as this feature is not available with AirPlay.
|Mv||Motion input||A pulse will start the music playing, if no presence is detected for time MT parameter, the music server zone will be switched off. A double and triple click on the input will also turn the room off.|
|R||Reset input||Turns the room off and causes a pulse on RQ. A double and triple click on the input will also turn the room off.|
|G||Reserved for future use|
|Dis||Disable||Can be used as a child lock to stop all inputs working, however the user interface still works. A double and triple click on the input will also turn the room off.|
|DisMv||Disable Motion Sensor||Disables the motion sensor from brinign the music on.|
|A||Alarm input||Plays back the alarm soundtrack with volume level Va|
|Be||Doorbell input||Plays back the doorbell soundtrack with the volume level Vbe|
|Bu||Alarm clock input||Plays back the wake up track with volume level Vbu|
|Sleep||Sleep input||Zone will be turned off after the sleep delay Ts, unless the signal is turned back to OFF again, in which case the sleep timer will be cancelled.|
|TTS||Text to Speech||Text will be played back in the zone (maximum 100 characters)|
|Qp||Digital output||Will return the real state of the Music Server room.|
|AQv||Analogue output||Returns the real state of the Music Server room volume.|
|AQr||Analogue output||Returns the remaining time of the sleep timer.|
|RQ||Pulse output||Will pulse on when a double click is detected (physical inputs only) or the R input is activated.|
|RaQ||Pulse output||Will pulse on when a triple click is detected (physical inputs only).|
|Tdc||Maximum pulse seperation (s)||This parameter defines how close together two pulses have to be in order to count as a double click and not two separate clicks. The smaller this parameter the faster the click has to be.|
|Sv||Volume step size||This parameter will effect the Vol+ and Vol- parameters.|
|Rf||First recurrence||The amount of time in seconds that an input must be held to repeat a command.|
|Rr||Repeat duration||If an input is held down longer than Rf then the command is repeated every Rr seconds.|
|MT||Motion timeout [s]||The zone will be turned off after MT seconds of no movement.|
|TH||Duration on [s]||With a pulse on Mv the zone will be on for this duration.|
|Vm||Maximum volume level||Maximum volume level for this zone.|
|Vd||Default volume level||Default volume at which the zone comes on.|
|Va||Alarm volume level||Volume level used for alarm siren.|
|Vbe||Doorbell volume level||Volume level used for doorbell.|
|Vbu||Alarm clock volume level||Volume level used for alarm clock.|
|Vt||Text to speech volume level||Vulume level used for text to speech annoucements|
|Ts||Sleep time [s]||Sleep timeout in seconds.|
Setup in the app
All further setup is done via the Loxone app directly from your phone.
Broswe to the zone you want to change the settings off and click the line to open the details.
In this view you can see all the functions you woudl expect to see in any music player.
To get to further options click the menu icon in the top right corner.
Here you can now change the settings for the Music Server as a whole or this particular zone.
Below you can find a description for each.
|Multiple Zones can be grouped together to play the same music in all areas.|
You can set favourites for each zone. This way your kids can have their own favourties for their rooms whilst you stay in charge of the rest of the house.
|This is a global lists of favourties. Here you can store things like your favourite playlists or radio stations.|
|In deiner persönlichen Musikbibliothek findest du alle deine Playlists, Alben und Titel. Hier kannst du auch weitere Songs zu deinen Favoriten hinzufügen.|
|Here you can browse and edit your playlists.|
|Here you can setup and manage your service subscriptions for Spotify, Google Music,...|
|With the support of TuneIn Radio you can browse a huge number of online radio stations here.|
|Of course you can also play back audio from any other analogue sources via the Line In.|
|Here settings such as audio delay or maximum zone volume can be adjusted.|