Loxone Support Community

Find answers, ask questions and become part of the Loxone Community.

Loxone Support Community › Category: Loxone Config › Movement and Lux value, lights out
0 Vote Up Vote Down
3 years ago
Movement and Lux value, lights out

Is the following possible with the lightcontroller:

switch off the lights if the Lux value is higher as the T setting, and there is still movement on Mt and P

1 Answers
0 Vote Up Vote Down
3 years ago

Hi Patrick

What you are wanting to do in its exact form is not possible. There is no output from the lighting controller to read the current Presence status or current lux parameter.

The closest you could get would be to have the lux input through a greater than block set the same as the T parameter. Then use an AND block to compare this with current motion/presence to trigger R.

KR

Hugh