EIB/KNX data types

Below you will find an overview of the data types used by the Miniserver when using the EIB/KNX sensors and actuators in Loxone Config

Get more information about our Config software
KNX/EIB Function
Information length
EIS
Sensor
Extended sensor
Actuator
Extended actuator
Switch
1 Bit EIS 1

Off: x/x/x:0
On: x/x/x:1

Off: x/x/x:0
On: x/x/x:1

Dimming
(Position, Control, Value)

1 Bit
4 Bit
8 Bit

EIS 2    
Time 3 Byte EIS 3    
Date 3 Byte EIS 4    
Floating point 2 Byte EIS 5    
Relative value 1 Byte EIS 6 Min: x/x/x:0%
On: x/x/x:255%

Min: x/x/x:0%
On: x/x/x:255%

Blinds / Roller shutter 1 Bit EIS 7        
Priority 1 Bit
2 Bit
EIS 8        
IEEE Floating point 4 Byte EIS 9    
16-bit counter values 2 Byte EIS 10 Min: x/x/x:0#
Max: x/x/x:65535#
Min: x/x/x:0#
Max: x/x/x:65535#
32-bit counter values 4 Byte EIS 11    
Access control 1 Byte EIS 12   Min: x/x/x:0%
Max: x/x/x:255%
  Min: x/x/x:0%
Max: x/x/x:255%
ASCII character 1 Byte EIS 13   Min: x/x/x:0%
Max: x/x/x:255%
  Min: x/x/x:0%
Max: x/x/x:255%
8-bit counter values 1 Byte EIS 14   Min: x/x/x:0!
Max: x/x/x:255!
  Min: x/x/x:0!
Max: x/x/x:255!