XAL Light Air

XAL Light Air is one of the Loxone Air compatible luminaires from XAL.

It is available with 1-2 Luminary heads and optional sensors and buttons.

Table des matières


Mise en service

Please follow the manufacturer's instructions for mounting, installation, and power supply to the Luminiaire.

In delivery state, pairing mode will be active after the power supply has been established.
This is indicated by the power button flashing as follows:

Then follow the pairing procedure on the Air Interface.

To activate the pairing mode manually, switch off the power for 10 seconds, then switch it back on. If no connection to a Miniserver can be established for two minutes, then pairing mode is activated for 30 minutes.

If the connection to the paired Air Interface gets lost, the luminaire is offline.
This is indicated by the power button flashing as follows:


Button Assignment

There are up to 8 freely programmable buttons on the luminaire, which may be divided into up to two keypads.
The numbered button inputs in Loxone Config correspond to these buttons starting with the first keypad in ascending order. Below are two examples:


Capteurs

Manually inserted devices show all possible Sensors and Actors.

When the device is paired or an existing device is replaced, all not supported IOs will be removed.

Résumé Description Unité Valeurs
Motion Sensor 1 Motion Detection sensor 1 - 0/1
Motion Sensor 2 Motion Detection sensor 2 - 0/1
Brightness Brightness Sensor Lx
Button1 General Button 1 - 0/1
Button2 General Button 2 - 0/1
Button3 General Button 3 - 0/1
Button4 General Button 4 - 0/1
Button5 General Button 5 - 0/1
Button6 General Button 6 - 0/1
Button7 General Button 7 - 0/1
Button8 General Button 8 - 0/1
Temperature Indoor Temperature Sensor °
Humidity Humidity Sensor %
CO2 CO2 Sensor ppm
Sound Sound Sensor -




Actionneurs

Résumé Description Unité Valeurs
Direct Lighting Smart Actuator for controlling lighting via compatible Lighting function blocks. % 0...100
Indirect Lighting Smart Actuator for controlling lighting via compatible Lighting function blocks. % 0...100




Entrées diagnostic

Résumé Description Unité Valeurs
Statut en ligne XAL Light Air Indique si l'appareil est accessible par le miniserveur.
Diagnostics for Air devices
Diagnostics pour les appareils Tree
Diagnostics pour les extensions
Numérique 0/1




Propriétés

Résumé Description Unité Valeurs Valeur défaut
Surveiller le statut en ligne Si cette case est cochée, vous serez averti via l'app Loxone ou le Mailer lorsque l'appareil n'est plus disponible ou hors ligne. - - -
Numéro de série Numéro de série du produit Air - - -
Type d'appareil Type d'appareil Air - - -
Overrun time motion Overrun time for motion sensor(s) s 10...600 90
Brightness transmission cycle Transmission cycle for brighness sensor(s) s 60...600 60
Sensor transmission cycle Transmission cycle for other analog sensors s 60...900 900
Comportement du Bouton Spécifie le comportement lorsqu'un bouton est enfoncé.
Impulsion : Envoie une impulsion sur le front montant
OnOff : Envoie ON sur le front montant et OFF sur le front descendant
- - -