Components for your Loxone heating controller
Your own simple and cost effective heating controller with Loxone - all you need on top of a Miniserver are some temperature sensors and thermal actuators.
How it works:
We recommend having a temperature sensor in each room of the house in order to have full individual room control with your heating controller. The thermal actuators for the underfloor heating can be attached to the heating circuit distributor or directly to a radiator.
When the current temperature falls below the required temperature (set in the configuration software), then the heating controller opens the thermal actuator for the underfloor heating. Otherwise it remains closed.
Recommendations from the Loxone Shop
|
|
 |
The centrepiece of Loxone's home automation solution.
The Miniserver is the centrepiece of Loxone's home automation solution. You can connect it Loxone temperature sensors as well as thermal actuators to create the perfect heating controller.
It's also perfect for controlling blinds, heating, music and more.
|
|
 |
For attaching cost effective sensors in your house.
When adding a large number of sensors to your home, we recommend using our 1-Wire Extension. It allows you to add temperature, humidity and other sensors easily and cost efficiently.
|
|
 |
For precise temperature measurement, indoors and out.
You can connect our high quality, accurate analogue temperature sensor directly to the Loxone heating controller system.
|
|
 |
To control your heating circuit distributor.
Thermal actuators (for example for underfloor heating) are attached directly to the heating circuit distributor and control heating with Loxone's control system.
|
