The following qualification requirements must be met for the light source to be considered High Efficacy as specified in Section 150.0(k) and Table 150.0-A.
The light source shall meet the following requirements when measured in accordance with the test method of Section JA8.3.1:
The luminous efficacy of the light source shall be equal to or greater than 45 lumens/Watt when tested at its full light output.
The light source shall meet the following requirements when measured in accordance with the test method of Section JA8.3.2:
The light source shall have a power factor equal to or greater than 0.90 when tested at its full light output.
The light source shall meet the following requirements when measured in accordance with the test method of Section JA8.3.3:
The light source shall have a start time no greater than 0.5 seconds.
The light source shall meet the following CCT, Duv, and color rendering requirements when measured in accordance with the test method of Section JA8.3.4:
(a) Inseparable SSL luminaires, LED light engines, and GU24-based LED lamps shall be capable of providing a nominal Correlated Color Temperature (CCT) that is 4000 Kelvin or less and within 0.0033 Duv of the black body locus in the 1976 CIE color space.
(b) All other light sources shall be capable of providing a nominal Correlated Color Temperature (CCT) that is 3000 Kelvin or less and within 0.0033 Duv of the black body locus in the 1976 CIE color space.
(c) All light sources shall provide a Color Rendering Index (CRI) of 90 or higher and color rendering R9 value of 50 or higher when measured at a correlated color temperature and Duv value that comply with Section JA8.4.4.
The light source shall meet the lumen maintenance, rated life, and survival rate criteria when measured in accordance with the test method of Section JA8.3.5 and JA8.3.6.
(a) Lumen Maintenance: The percentage of initial light output after the 6,000 hour test must be equal to or greater than 86.7 percent. For inseparable SSL luminaires referencing the in-situ measurement temperature of the LED, complying products shall have IES LM-80 test results that produce an IES TM-21 projected L70 of at least 25,000 hours.
(b) Rated Life: The light source shall have a minimum rated lifetime of 15,000 hours.
(c) Survival Rate: 90 percent of tested units shall be operational at the completion of the 6,000 hour life test.
Exception to Section JA8.4.6(c): Inseparable SSL luminaires referencing the in-situ measurement temperature of the LED.
JA8.4.6 Dimming, Reduced Flicker Operation and Audible Noise
The light source shall meet the following dimming, reduced flicker operation, and audible noise requirements when measured in accordance with the test method of Section JA8.3.7:
(a) The light source shall be dimmable down to 10 percent light output where 100 percent full light output is defined as operating the light source at the maximum setting provided by the control.
(b) LED-based light sources shall meet the requirements of NEMA standard SSL 7A as Type 1 or Type 2 products.
EXCEPTION to JA8.4.6(b): LED based light sources designed to be dimmed by controls other than forward phase cut dimmers.
(a) Light source in combination with specified control shall provide “reduced flicker operation” when tested at 100 percent and 20 percent of full light output, where reduced flicker operation is defined as having percent amplitude modulation (percent flicker) less than 30 percent at frequencies less than 200Hz, tested according to the requirements in Joint Appendix JA-10.
(b) Light source shall not emit audible noise above 24dBA measured at 1 meter from the light source when tested at 100 percent and 20 percent of full light output.
All Registered Loxone Partners must complete our 3-day Expert Training Course within 6 months of signing up. Failure to do so will void your partnership with Loxone.
Explore the benefits of a Real Smart Home! If you have any questions, we are happy to answer them!
You want to see our Loxone Smart Home? Leave us your contact details and we’ll contact you to schedule the tour!
Terms and Conditions for #MyInvisibleSwitch Contest powered by Loxone:
Once the below form is completed you will be able to view and download our MetroStudy presentation.
Leave us your contact details and your question. We’re happy to answer it for you!
You want to know more? One of our smart home experts is happy to answer all your questions and to give you tips for your smart home. Please leave us here your contact details and we’ll get in touch with you.
You want that your home becomes an energy saver? One of our smart home experts is happy to answer all your questions and to give you tips how to realize your intelligent energy management. Please leave us here your contact details and we’ll get in touch with you.
Explore the benefits of a Real Smart Home! If you have any questions, we are happy to answer them!
We are happy to answer any questions on how to implement Smart Home technology in your building projects.
Send us a message and our Smart Home experts will get in touch with you.
One of our smart home experts is happy to answer them! Just leave us your contact details:
Loxone Gold Partners are entitled to 50% off partner cost (after original discount), and Loxone Platinum Partners are entitled to a 100% discount on two selected new products. This promotion is valid for 90 days.
Upon completing the full Expert Training Course (part 1, part 2 & project days) and being awarded Silver Partner Status, your company will be awarded two Special Project Discounts of 25% each, valid for the company and the employee that attended the initial training. Each discount can only be applied against one order.
A Loxone Showroom is a great way to demonstrate the power of the Loxone Smart Home to your customers. If you choose to open a public showroom, we will be on hand to support you as you plan it.
A discount is also available to those Partners meeting the criteria. Read more here.
Your personal project consultant is here to help you, offer advice and best practice tips for installing and marketing Loxone Smart Homes and much more… all free of charge. Need some help demonstrating the system’s capabilities to a customer? Why not bring them to us? For further information about customer consultations, please contact your project consultant.
We often receive promising inquiries from homeowners and builders looking to have Loxone installed in their homes. As a Loxone Gold or Platinum Partner, you will be offered these leads first if they fall within your area and/or specialty. As an up-and-coming Silver Partner, we will also offer you leads where available/appropriate.
We offer a ‘Partner Map’ on our website to help customers find nearby Loxone Partners. We want to promote active Loxone Partners and improve the quality of this service for our customers.
Therefore, only Silver, Gold and Platinum Partners will be listed on the map. Please note that if you are inactive for more than 365 days, or fail to reach your Partner requalification criteria after 12 months, your listing will be automatically removed.
For more information, please speak to your Partner Consultant.
Need some help? With us, you’ll receive free technical support via telephone or with a remote desktop session.
As a Gold or Platinum Partner, you can purchase marketing material, such as roll-up banners and display cubes at a discount to boost your sales even more. We also support you with discounts for training if you are looking to make your employees Loxone experts too.
Forget artificially inflated prices. We offer a fair discount structure that rewards active Partners and offers an affordable option for your customers.
The customer project survey checks that the project fulfills the minimum criteria for a Partner to achieve/maintain Gold or Platinum status.
After reaching your Partner status, you’ll have 12 months to requalify. Here, among other things, a certain annual spend is required. The annual purchase volume is calculated on the basis of the net purchase price for your orders over the last 12 months at Loxone.
To achieve Silver, Gold and Platinum Partner status, the annual turnover is determined as indicated.
To achieve Platinum Partner status, you must install only Loxone as a smart home system and this must be clearly indicated on your website and marketing materials/channels.
A Loxone Showroom is a great way to demonstrate the power of the Loxone Smart Home to your customers. If you choose to open a public showroom, we will be on hand to support you as you plan it. A discount is also available to those Partners meeting the criteria. Read more here.
The customer project survey checks that the project fulfills the minimum criteria for a Partner to achieve/maintain Gold or Platinum status.
The annual purchase volume is calculated on the basis of the net purchase price for your orders over the last 12 months at Loxone.
To achieve Silver, Gold and Platinum Partner status, the annual turnover is determined as indicated.
In der Expertenausbildung Modul 2 perfektionieren Sie Ihre Fähigkeiten in Sachen Planung, Konfiguration, Bedienung bis hin zum Verkauf und setzen so künftige Projekte blitzschnell und gekonnt um.
In our Loxone Expert Training you become a Smart Home expert within 3 days. You’ll learn the fundamentals of the Loxone Smart Home System, get to know our configuration software, learn how to organize your smart home projects – from the planning all the way to the implementation and get your certification as a Loxone Partner.
Platinum partners are true smart home enthusiasts, who install Loxone exclusively and carry out projects to an exceptionally high standard. They know the Loxone solution, products and accessories down to the last detail. The level of know-how and consulting is equivalent to that of Loxone.
Gold Partners are more experienced than Silver Partners and have already implemented some verified customer projects with Loxone. They’re a great choice for Loxone Smart Home projects of all kinds.
Silver Partners have undertaken training with Loxone and are well equipped to advise customers and install Loxone projects. Silver Partners have typically carried out fewer installations than Gold or Platinum Partners.
Registered Partners are just starting out on their Loxone journey. They have not attended Loxone Expert Training and their level of knowledge/experience is not known to us.
The Welcome Package can be purchased once for a discounted price. The package is used to get to know our products and is, therefore, a prerequisite for the Loxone Partner Program.
We’d be more than happy to give you a ring to answer any of your questions about becoming a Loxone Partner. Simply send us your details using this form and we’ll be in touch!
Sign up to our newsletters and be the first to receive news, exclusive offers and more:
Follow us on social media to stay up-to-date with the latest news from Loxone.
From your first inquiry to the finishing touches on your project, Loxone and your Loxone Partner will be with you all the way. Benefit from the experience that we have gained through the realization of tens of thousands of smart homes worldwide to ensure your project exceeds your expectations.