Loxone Support Community

Find answers, ask questions and become part of the Loxone Community.

Loxone Support Community › Category: General › Presence detection and lighting
0 Vote Up Vote Down
3 years ago
Presence detection and lighting

I’m using the Presence module connected to the P input on my Lighting block rather than using the Mv input. Presence has been active since 08:35 this morning and now that it’s getting dark, the light won’t come on. It all works fine when I test it in the simulation though.

Cheers,

Ewan

Attachments
77B625F5-17D6-481B-A46D-43C633EC6B26.png
64A5D14E-5056-4B0D-87E7-38506F15F160.png
040BB796-4F1D-4A98-95F0-5DB40352584C.png
2 Answers
0 Vote Up Vote Down
3 years ago

To add to the above, the lights came on with the lux level dropped to 2.1.

When the room is empty and dark, the lights come on when I enter the room.

Thanks,

Ewan

0 Vote Up Vote Down
3 years ago

Same problem in the family room. Presence active since 12:17, lux fluctuating below the target value for over an hour and the lights haven’t come on yet. Manually adjusted the lux level in Live Preview right down to 0 and the lights still didn’t come on.

There is nothing connected to Mv, with the Presence function block being activated by the Presence Detector and QPr connected to P in the Lighting Controller.

Thanks,

Ewan

3 years ago

This evening, Presence active in the Family Room from 15:58 and the light came on when the lux level dropped around an hour later.