Loxone Support Community

Find answers, ask questions and become part of the Loxone Community.

Loxone Support CommunityCategory: NetworkAVRs stopped working in the computer network after the last update of the miniserver
3 years ago
AVRs stopped working in the computer network after the last update of the miniserver

Hello.

After the last update of the miniserver (11.1.9.14), the ONKIO PR-SC 5530 and ONKIO TX-NR 535 amplifiers stopped working in the wired network. If I disable the miniserver from the network, the AVRs work correctly. As soon as the miniserver is connected to the network, the network settings menu disappears on the AVRs and they stop responding to commands from the miniserver. All the equipment in the network at their fixed ip addresses.

Everything works fine with the old miniserver program.

Best regards,

Dmitry

3 Answers
3 years ago

Hi Dmitry

As this is a very specific question related to a fault at your property I would suggest Loxone Support be the best place to go to troubleshoot this. The purpose of the community is more for help and advice on installation and design topics and general questions.

You can contact support on [email protected].

KR

Hugh

3 years ago

Hi Hugh

Unfortunately they don’t answer my questions.

In the changes for Loxone Config 12 specified this "– R12-I80 Removed Onkyo AVR template since its not working properly"

although this is present in the latest version Loxone Config.

Сould this mean that Onkyo AVR is no longer supported in the Loxone Config?

Best regards,

Dmitry

3 years ago

The AVRs stopped working with the Loxone Config version 11.1.9.3 and higher
Everything works fine with the Loxone Config version 11.0.7.5
The AVRs does not see the network even if the configuration is not loaded on the miniserver, but the firmware of the miniserver is updated to version 11.1.9.3
Best regards,
Dmitry