The stepper function block allows you to step up or down using a pulse input.

Loxone Musterkoffer


The analogue value at the output AQ is incremented or decremented according to pulses on the trigger Tr. The direction in which the AQ value changes can be set with parameter Dir. By default the stepper increments. The size of each step is set with parameter SI and the maximum value for AQ is set with parameter M. 

A pulse on the input R will reset AQ back to 0.



Tr Trigger With each pulse AQ is increased or decreased by a step, depending on the parameter settings.
R Reset Sets the output Q to 0.


Dir Direction If Dir = 0 then the output counts upwards, if Dir = 1 then the output counts downwards.
SI Step size Determines by how much the output AQ is changed with each pulse on Tr.
M Maximum value Sets how high the output AQ is allowed to go.


AQ Analogue output The current value is output here, and changes with each pulse on input Tr.