Stairwell light switch

This block can be used for staircases or commercial corridors to provide an adjustable timed delay and most importantly a warning function.

Loxone Musterkoffer


An pulse at the input Tr triggers the output Q to be on for the time defined by parameter TH

Before the output is switched off there is a visual warning - i.e. the lights flash off for a time set by parameter WT. The time this happens at is set by parameter TW. For example a 10 second on period, at 8 seconds (TW=2) the lights flash off for 0.5 seconds.

If Q is on and there is another pulse at Tr then the timer is restarted. If there is a pulse at O, the output is switched to on permanently and unless there is a pulse at R in which case it will be set to off.

If the Dis input is enabled then the inputs are disabled. The timing function and operation of the UI will still work. 

Basic setup