Saving switch-on delay

Following a pulse at the input (Tr) the output switches on after a delay until reset through input (R).

Loxone Musterkoffer


After a rising edge at the input Tr, the output Q is activated after a delay which is set through the parameter T. Any subsequent rising edges at Tr have no effect on the state of Q.

When R is then triggered the block timer is reset and the output Q is disabled. Then a new rising edge at the input Tr will activate the output after delay T.

The block can be set to be retentive, this is done by clicking on the battery symbol tl_files/loxone/documentation/EN-UK/function_blocks/Untitled.png to set the red NOT dot on the block (input is by default inactive). 


 Inputs  Tr Trigger  
   R Reset  0/Off
 Outputs  Q Output  
 Parameters  tl_files/loxone/documentation/EN-UK/function_blocks/lighting_controller/Untitled.png Remanence   0/Off
   T Delay duration [s]  1