Delayed pulse

When triggered this block sends a delayed pulse

Loxone Musterkoffer

Information

After a rising edge at the input Tr, the timer of the block is started. After the delay time D, the output Q is activated for the pulse duration which is set by T. The delay time D is restarted with each rising edge at the input Tr.

If the input R is activated, the timer is reset and the output Q is disabled. Then only after a new rising edge at the input Tr, will the timer be restarted.

The block can be set to be retentive, this is done by clicking on the battery symbol tl_files/loxone/documentation/EN-UK/function_blocks/Untitled.png to set the red NOT dot on the block (input is by default inactive). 

 

 
 Description
 Default
 Inputs  Tr Trigger  
   R Reset  0/Off
 Outputs  Q Output  
 Parameters  tl_files/loxone/documentation/EN-UK/function_blocks/lighting_controller/Untitled.png Remanence   0/Off
   D Delay duration [s]  5
   T Duration of output pulse [s]  0.5