Pulse at

This block allows a pulse to occur at a set time every day.

Loxone Musterkoffer

Basic setup

In the properties of the function block you can enter the time that you wish the pulse to occur at in the format hh:mm:ss (hours, minutes, seconds). The pulse lasts for 10 seconds at the Q output. 

If the input DisP is active then the output Q is locked and there is no pulse at the set time.



DisP Disable input

When DisP is on (1) then no pulse on Q occurs.


Q Digital output At the time set in the properties of the block a 10 second pulse will occur on this output.